Concrete Repair Set 10.100.002

• 1 x 25kg, 2-component epoxy resin mortar
• Consisting of epoxy concrete repair mortar and hardener
• Colour grey
• Coverage: 10kg =  Approx 1.2 meter square at a thickness of 5mm

Properties:

• Extremely hard and resistant
• Durable permanent bond to substrate material starting at a depth of 5mm
• Resistant to most chemicals
• Water-proof
• Dust-free
• Wide temperature range
• Very high load capacity
• Easily shaped
• Priming not necessary
• Application rate 10kg for approx. 1,2m² at 5mm thickness
• Apply up to 50mm deep up in one layer, apply more layers if necessary
• Curing time 6-8 hours each layer depending on temperature
• Can be walked on after 3-6 hours
• Installation temperature of +10°C up to +30°C
• Installation conditions - substrate must be dry and not in direct sunlight
• Processing time after mixing up to 60 minutes

Application:

• For repair of concrete and stone floors
• For internal and external areas
• For heavy traffic
• Holes
• Worn areas
• Defective steps and uneven areas
• Levelling
• Repair of damaged joints and seams

Also suitable for the repair of deep holes. Simply apply more coats.

Compared to normal concrete:

• 4-times more resistance to pressure
• 7-times more tensile strength
• 8-times more flexibility